 | |
Specifications
- Frames - 16 gauge KD, Pipe spacer anchors only, 12 gauge full sleeve reinforcing and existing opening anchor in head of frame
- For Doors - 8'0" x 8'0" (2438mm x 2438mm) 16 gauge 747 flush, S edge
- Weatherstrip/Threshold - Testing and approved; Pemko S88 on head & jamb; Pemko 2005AS as threshold
- Hinges - MCKINNEY TA2714 or T2714
- Latch Bolt: Stainless Steel
- Hardware Configuration 1 - SARGENT HC8700 or 12-HC8700 Exit Devices
on both leaves - Pairs of Doors, Dade County Acceptance #02,0924.04
- SARGENT 8200 Series Mortise Lock (active), SARGENT HC8700 or
12-HC8700 exit devices (inactive), Ives 360 surface bolts at 5-3/4"
(147mm) at centerline - Pairs of Doors with 8200 Series Mortise Lock,
Dade County Acceptance #02, 0924.04
- Strikes - 654 top bolt in frame with larger mounting screws for both
top and bottom cases. 655 bottom strike furnished standard
- Electric Options: AL-, PL-, BT-, TL-, 53-, 54-, 55-, 56-, 57-, 58-,
59-
- Mounting Fasteners: Supplied standard with wood and machine screws;
Available with through-bolts and mortise (sex) nuts
- Device Centerline from Finished Floor: 41” (1041 mm)
- Door/Opening Height: Must be specified- 96" (2438mm) Max Door
Opening; 84" (213mm) Standard for Turboship
- Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)
- Projection: Pushbar Neutral – 3" (76 mm); Pushbar Depressed – 2-1/8"
(54 mm)
|
