|Von Duprin 6210 Electric Strike|
The 6210 electric strike by Von Duprin is designed to allow remote release of the locking mechanism. Can be tied to security systems for electronic control of doors. Comes in both 12V and 24V.
|Von Duprin 6211 Electric Strike|
The Von Duprin 6211 electric strike allows remote control of the locking of a door. Available in 12V and 24V. Fail secure and non handed.
|Hes 9500 Fire Rated Electric Strike|
|Hes 9600 Electric Strike|
|Von Duprin EL 996L Electrified Lever Trim|
This VD EL 996L electrified lever trim allows keyed access from the outside of the door it is installed on. Works with the Von Duprin 99 series of exit devices. Also works for gates.
|Von Duprin PS914 Power Supply|
|Von Duprin PS914-2RS Power Supply|
|Adams Rite 8800EL Electrified Panic Bar|
The Adams Rite 8800 EL is an electrified panic bar designed for aluminum doors. It is ANSI Grade 1 for heavily used doors, and will fit most doors. Comes standard with an aluminum finish.
|Cal Royal 9800 Panic Bar|
The Cal Royal 9800 panic bar is a UL listed for panic and fire. Grade 1, it can be used on most single doors as well as gates. Comes in 36" and 48" lengths.
|Cal Royal 7700 Panic Bar|
The Cal Royal 7700 series of panic bars is ANSI A156.3, Grade 1 heavy duty exit device for doors. Replaces the 9900 Cal Royal series panic bar. UL listed, designed for single door applications.
|Cal Royal 9860 Vertical Rod Exit Device|
The CR 9860 is a vertical rod panic bar that is designed for double door applications. This is a surface mounted exit device, which works for both doors and gates. Comes in lengths of 36 inches and 48 inches.
|Cal Royal 7760 Vertical Rod Panic Bar|
The CR 7760 is the vertical rod panic bar of the 7700 series. ANSI Standard of Grade 1 for heavy use. Rated for panic and can also be fire rated.
|Von Duprin 98 Panic Bar|
The Von Duprin 98 panic bar is a grade 1 exit device designed for heavy use applications. Can be used on single doors and comes in lengths of 36 inches and 48 inches. Comes in a standard aluminum finish.
|Von Duprin 99 Panic Bar|
The Von Duprin 99 exit device is designed for both indoor and outdoor applications, including doors and gates. Available in a variety of finishes, this panic bar will fit most single doors at 36 inches ior 48 inches in length. Click here to order one today.
|Von Duprin 990DT Dummy Trim|
The Von Duprin 990DT is a dummy trim for use with the 99 series of panic bars from Von Duprin. It will allow access through the door only when it is already unlocked. Comes in a standard brushed chrome finish.
|Von Duprin 990NL Night Latch Trim|
The Von Duprin 990NL is a night latch trim for the outside of a door. It works when paired with a Von Duprin 99 series panic bar. This allows keyed access from the outside.
|Von Duprin 996L Lever Trim|
This VD 996L lever trim allows keyed access from the outside of the door it is installed on. Works with the Von Duprin 99 series of exit devices. Also works for gates.
|Von Duprin 996L-NL Lever Night Latch Trim|
The Von Duprin 996L-NL is a night latch lever trim that works with the 99 series panic devices by Von Duprin. It is an exterior exit trim that can allow keyed access from the outside. Comes standard in a satin nickel finish.
|Von Duprin 996L-BE Lever Blank Escutcheon Trim|
The VD 996L-BE lever trim has a blank escutcheon which means you can only open it from the outside if it is already unlocked. This is designed to work with the 99 series of panic bars from Von Duprin.
|Von Duprin 996L-DT Lever Dummy Trim|
The Von Duprin 996L-DT is a dummy trim designed to work with the Von Duprin 99 series panic bar devices. It does not allow access from the outside of the door unless it is already unlocked.
|Cal Royal NESC 9800 Panic Bar Lever Trim|
The CR ESC 9800 is a levered exit trim designed to work with the Cal Royal 9800 panic bar. It comes in three functions, two of which allow the door to be locked or unlocked from the outside.
|Cal Royal 9800NL Panic Bar Keyed Pull Trim|
This trim by Cal Royal is designed to work with the CR 9800 series panic bars. The 9800NL is a handled trim that allows entry through the door from the outside. Comes standard in a brush chrome finish.
|Cal Royal 9800 DTP Outside Pull Trim|
This CR 9800 trim is designed to be used with a CR 9800 panic bar. This dummy trim allows access from the outside, but only once the door is unlocked from the inside. Comes standard in brushed chrome finish.
|Cal Royal 9800 EOP Blank Plate Trim|
The CR 9800EOP is outside trim to be used with the Cal Royal 9800 panic bars. This is a simple blank face plate, which does not allow access through the door from the outside.
|Cal Royal ESC7700 Escutcheon Lever Exit Trim|
The Cal Royal ESC7700 is a lever exit trim designed to work with the 7700 series panic bars. This is non-handed and easily field reversible. Allows access through a door from the outside.
|Cal Royal 7700NL Night Latch Trim|
The CR 7700NL is a handled trim that allows access through a door from the outside. This exit trim is designed to work with the Cal Royal 7700 panic bars.
|Cal Royal 7700DTP Dummy Trim Pull|
The CR 7700DTP is an exit trim that allows access through a door as long as it is unlocked from the inside. This works with Cal Royal 7700 series panic bars. It comes standard in a stainless steel finish.
|Cal Royal 77TP00 Thumbpiece Trim|
The Cal Royal 77TP00 is an exit trim that allows access through the door from the outside. This handle is designed to be used with CR 7700 series exit devices.
|Cal Royal 7700 EOP Exit Only Plate Trim|
The Cal Royal 7700 EOP is an exit only plate trim designed to be used with a Cal Royal 7700 series crash bar. This exit trim does not allow access from the outside through the door it is installed on.