We carry the entire Cal Royal commercial product line. Call 1-800-508-6889 for quantity discounts and product information or choose from the most popular products listed below.
- Dave Jabas, 37 Years Experience
Cal Royal door lock hardware provides a cost-effective solution for the security of your home or business. The commercial lock hardware meets the ANSI grading standards and is UL listed. Standard key way on all commercial hardware is SC1 Schlage keyway. Cal Royal also offers keyways to match Sargent, Corbin, Russwin and Yale. For your convenience, we have included on this page links to the manufacturer's installation instruction templates for all Cal-Royal products. Please scroll down to the bottom of the page for Cal Royal Installation Instructions.
Cal Royal residential hardware is the standard grade 3 and is available in knob and lever style as well as ornate handle sets. All locks can be ordered keyed alike or keyed different. Standard finishes include polished brass, satin nickel, oil rubbed bronze and antique brass. Available finishes are determined by each individual hardware design.
The Cal Royal 2200 panic bar is a great solution for a single door installation at a competitive price. UL listed and meets Grade 1 requirements for doors with heavy traffic. Comes in 36" and 48" lengths.
The CR 9860 is a vertical rod panic bar that is designed for double door applications. This is a surface mounted exit device, which works for both doors and gates. Comes in lengths of 36 inches and 48 inches.
This trim by Cal Royal is designed to work with the CR 9800 series panic bars. The 9800NL is a handled trim that allows entry through the door from the outside. Comes standard in a brush chrome finish.
This CR 9800 trim is designed to be used with a CR 9800 panic bar. This dummy trim allows access from the outside, but only once the door is unlocked from the inside. Comes standard in brushed chrome finish.
The Cal Royal ESC 2200 Lever Panic Bar Trim is an external hardware for a door or gate that allows access through the door or gate from the outside. This works when paired with a Cal Royal 2200 series crash bar on the inside.
The Cal Royal 2200DTP is a blank or dummy pull trim that will allow access through the outside of a door as long as it is unlocked from the inside. This exit trim is meant to be used with a CR 2200 series panic bar from Cal Royal.
The CR 7700DTP is an exit trim that allows access through a door as long as it is unlocked from the inside. This works with Cal Royal 7700 series panic bars. It comes standard in a stainless steel finish.
The Cal Royal GLSCVR9800 Concealed Vertical Rod Panic Bar can be used on doors with narrow spaces between the edge of the door and glass panels. This panic bars latches at the top and bottom of the door using vertical rods.
The Cal Royal GLSCVR7700 Concealed Vertical Rod Panic Bar can be used on doors with narrow stiles around large glass panels. This panic bars latches at the top and bottom of the door using vertical rods. The rods are installed inside the door.
Please note: During
the redesign we were forced to remake many of the pages of Cal Royal
products that we sell. If you had bookmarked one of these pages you
should have ended up at this page. Rest assured that even though we do
not have all the product pages up at this time, we do still sell the
full line of Cal Royal products. Please call us toll free at
1-800-508-6889 or 952-435-5003 to discuss your specifc needs.
Cal Royal Product Installation Instruction Templates